Waxing A Snowboard :: essays research papers

How to jump a snowboardThere several ship canal to go about waxing a snowboard. Firs you have to determine what conditions you get out be riding in. Then you exit have to choose a wax. Say you argon going to Vail and the snow condition are.... well lets bonnie say the temp.. of the snow is about 20*. Well the thing you have to do is find a low temp. wax. The way you determine a low temp. wax from a high temp. wax is by the rating.. menial temp. waxes will be in a range from -20* to about 25*. A high temp. wax will be in a range from about 25* to 40*. There are waxes make for higher conditiond above 45* that are utilise in conditions that are referred to as, summer conditions. The wax that is used in summer conditions is a harder wax that will protect your board from sand, dust, and ice crystals. If you are riding in low temp. conditions with a high temp wax your performance will not be that good. If the conditions are going to go back and off in temp. you should wax your boar d with a low temp. wax or you can use a wax that can be used in all temps.WAXING INSTRUCTIONS FOR HOT WAXING1. exact wax or waxes for correct snow temperature and condition.2. Use in a well-ventilated area or with a respirator. (Only if you are hot waxing)3. Heat contract below the smoking iron temperature.4. Melt the smallest end of the wax on the iron and knock off all over the snowboard.5. Smooth out drips with iron.6. Let wax on the whole dry then scrape with a plastic or admixture scraper.7. Buff wax with a buffing pad.IF YOU ARE DOING A RUB ON WAS YOU WILL NEED TO FALLOW THESE INSTRUCTIONS